ＳＣＲＥＷ ＭＡＮＡＧＥＲ Ｍｏｄｅｌ３０１／４００・達人
HOME > SCREW MANAGER Model301/400・達人> MODEL３０１ ／４００ Screw Length
MODEL３０１ ／４００ Screw Length Measuring Expected Effect
By Tie-up with product plan section, you can make more accurate design of screw clearance.
It is possible to be multiple x stracture comparing with former Items |
| |
[Visualization ] create expectations
|
 |
| MODEL301 prevent from crushing bottom of screw hole by using wrong screw. |
|
 |
| Keep the strength of tighten screw, more reasonable length screw can be used.
|
| Usual method cannot check the screw length accurately while screw fastening, the clearance of screw has to be longer (at least 2mm)
|
| Making more compact your product design, and also to be multiplex-structure by insuring accurate the screw clearance when assembling the product. [i.e. to be 1mm from 2mm]
|
|
 |
| In case of Hollow Screw, It can be more narrow part [the screw of 8mm length is used, 13mm of thickness screw receiving part with 10~11mm tapping Hole. Its clearance will be 2~3mm）if thickness is changed only 1mm, the product weight can be made considerable weight less |
|
 |
| Showing the screw fastening value prevent the scattering work, and it will be helpful to be upgraded your product. |
|
|
Page Top
